Types of Foundation Repair Methods for Your Home

Types of Foundation Repair Methods for Your Home

One of the most vital parts of a home is the foundation. When the house’s foundation is damaged, you can bet that it’s going to be causing trouble in other areas as well.

When you spot cracks on the floor, leaning walls, or leaky plumbing, it’s time for damage control. 

Find out the different types of foundation repair methods you can utilize for your home. 

Piering

One way to repair a damaged foundation is by using steel or concrete posts. This method is often used to correct foundation settlement.

Depending on the type of piering used, they can either be driven to the foundation or the ground to bolster the structure. Concrete piers are the more affordable option and don’t need to be driven too deep into the ground.

However, the installation of concrete piers tends to be messy and labour-intensive. It also takes several weeks to complete because the concrete needs at least a week to cure.

Meanwhile, steel piering does provide better, longer-lasting support for your foundation because it can be driven up to 75 feet into the soil. This helps make your foundation more stable.

However, steel piering tends to be more expensive than concrete piers. Whatever kind of pier you choose, be sure to consult your contractor or home builder to figure out the best option for your home.

Slabjacking

Another way you can repair your foundation is by slabjacking. In this method, access holes are drilled into the concrete which is then filled with some type of material. 

This process effectively lifts any sunken concrete slab. This way, you don’t need to spend too much to replace your concrete foundation.

Slabjacking has several benefits. You can easily conduct this type of repair in any weather.

Unlike piering, there is also little to no disruption to your landscaping. There’s also less heavy-lifting involved because you don’t need to move any slab of concrete. 

There are different kinds of materials you can use for slabjacking. 

Commonly, contractors will mix sand, cement, and other materials to make a slurry. This mixture is best for slabs, porches, driveways, and steps.

This, however, takes a bit of time to cure and does not always fill every hole. It can even lead to bigger problems because it is susceptible to water damage and may break down.

A better option is high-density polyurethane foam. This is a type of expanding foam that’s similar to the material used for spray foam insulation except stronger. 

This material is best for large, heavy, or sensitive concrete because it is lightweight and has a quick drying time.

It’s also permanent and capable of filling all voids below the concrete.

More Repair Resources

There are different ways to fix foundation problems. Be sure to follow the advice of your contractors and get the foundation checked by a structural engineer if you experience problems.

This will ensure your family’s safety and avoid potential damages. 

Do you have more problems that need to be repaired? Check out our reviews below for the best repair services in Edmonton: